HOW TO SETUP LINKSYS VELOP WHW0301, WHW0302, WHW0303?a

The Linksys Velop setup and installation include setting up your main Velop node and then adding child nodes to the network. The main Velop router connects to your existing modem in order to access the internet service. The secondary or child nodes act as a satellite. They are responsible to pick up the main router’s network and increase their throughput in order to eliminate dead zones from your premises.

Setup Linksys Velop WHW0301 WHW0302 WHW0303 is not similar to any other wireless router. The Velop WiFi works on a mesh WiFi technology, in which you need to set up all the nodes individually. It may sound a little confusing, but you can easily sail through the setup, provided you follow the instructions with utmost care.

IN THIS POST, YOU WILL LEARN:

  • How To Setup Linksys Velop WHW0301
  • How To Setup Linksys Velop WHW0302
  • How To Setup Linksys Velop WHW0303

Basically, all three are variants of Linksys Velop. These are not different models, instead, they are just updated versions of their predecessors. Therefore, the steps are the same for all three variants. You don’t have to learn different steps for the aforementioned three models.

REQUIREMENTS FOR LINKSYS VELOP SETUP 

To help you clearly understand how to setup Linksys Velop WiFi system, we have put down certain points for you. These are the requirements that you need to meet in order to proceed with the Velop router setup.

YOU WILL NEED – 

  1. Linksys Velop WiFi system (Setup Linksys Velop WHW0301 WHW0302 WHW0303)
  2. Existing modem with active internet service
  3. An Ethernet cable
  4. Wall outlet nearby your modem
  5. A computer or smartphone
  6. Stable power supply

METHOD 1: LINKSYS VELOP SETUP USING THE VELOP APP

Firstly, we will discuss the Velop app setup method. This method is all about getting access to the Velop app to perform the initial configuration on your WiFi system. Follow the setup instructions below:

  1. To setup Linksys Velop, download the Velop app.
  2. Both the Play Store and the App Store have the Velop app on their platforms.
  3. Download the Linksys Velop app and let it install on its own.
  4. Launch the Velop app and tap “Setup a new network”.
  5. Select “Whole Home Mesh WiFi (Velop)” and turn On your smartphone’s Bluetooth.
  6. Follow the in-app prompts to complete the physical setup.
  7. Set up the internet settings on your network.
  8. You can either use the automatic method or the manual method as per your requirement.
  9. After that, create a Linksys Cloud account by following the in-app instructions.
  10. Give a name to your WiFi network and set up the WiFi password.
  11. Finalize the settings and the Linksys Velop setup using the app will be completed.

METHOD 2: SETUP LINKSYS VELOP USING THE WEB INTERFACE 

Secondly, we will walk you through the Linksys Velop setup using the web interface. For this, you will require a computer or laptop. Follow the instructions given below:

  1. Power On your Linksys Velop and connect your computer to the Velop’s network.
  2. Open a web browser on your PC and enter the IP address of your router.
  3. Type 192.168.1.1 in the address bar and press Enter to visit the Linksys Velop login page.
  4. After that, enter “admin” as the Linksys router admin password and leave the username field blank.
  5. Finally, you will be redirected to the Linksys Velop setup page.
  6. Click the CA link at the bottom of the page and then select Connectivity.
  7. Thereafter, click CA Router Setup and follow the on-screen instructions.
  8. At last, click Save or Apply to save the new settings.
  9. Lastly, you will successfully setup Linksys Velop WiFi system.

WHAT TO DO AFTER THE LINKSYS VELOP SETUP?

Here’s what you must consider doing as soon as you setup Linksys Velop WHW0301 or WHW0302 or WHW0303. Refer to the points below:

  • You must run a connectivity test on your WiFi network.
  • In case you have additional nodes, you can add them using the same method.
  • We suggest that you use the Velop app to add child nodes.
  • Check for the latest firmware updates on your router.

FINAL THOUGHTS 

This page was all about the Linksys Velop setup using two different methods. We discussed the app method and the web interface method. Of these two methods, we recommend that you go with the app method due to its convenience and flexibility.

MOREOVER, WE DISCUSSED – 

  • How To Setup Linksys Velop WHW0301
  • How To Setup Linksys Velop WHW0302
  • How To Setup Linksys Velop WHW0303

We hope that you liked this post and that it allowed you to go about the initial configuration on your Velop WiFi router. If you still encounter any issues while attempting to setup Linksys Velop, kindly get in touch with our support team for more help.