HOW TO FIX THE ISSUE OF LINKSYS VELOP KEEPS DISCONNECTING?

The Linksys Velop is a great mesh system with impeccable internet speed. But if the Linksys Velop keeps disconnecting from the internet fails the whole purpose of a mesh WiFi system. Sometimes due to several reasons, this issue could arise. Therefore, you must figure out the issue with the Velop and troubleshoot it accordingly. This is a common problem among users, but it’s nothing to worry about, as you can easily resolve it.

If you are facing the issue as well, don’t worry. Today, we’ll discuss the reasons behind the problem. Moreover, we’ll also discuss the ways you can resolve it.

WHY IS MY LINKSYS VELOP NOT WORKING?

There could be numerous reasons for the Linksys Velop not connecting issue. Some common factors responsible are as follows:

Power outage
Network interferences
Outdated firmware
Wrong router location
Internal issue
Improper cable connections

These are some factors for the Linksys Velop keeps disconnecting issue. Further, we’ll discuss the ways to resolve this issue.

TROUBLESHOOTING LINKSYS VELOP NOT CONNECTING ISSUE

Now that we know the factors responsible for the Linksys Velop not working issue, we can eliminate them. To resolve this issue, you must follow the below-mentioned methods:

INSPECT THE POWER SOURCE

After setting up the Linksys Velop correctly, you must ensure to plug them into a power outlet.
When you’re done with the router setup, you must set up the nodes accurately as well and provide them with a power source as well.
Ensure the main router is connected to your modem, as without a connection, the Velop will not work effectively.
Check for any power outages in your area. If there is, you need to wait till the power is back ON, as it’s the most common reason for Linksys Velop keeps disconnecting.

ELIMINATE OBJECT INTERFERENCES

Due to several objects, the Linksys Velop not connecting issue arises, as they interfere with the Velop’s network.
Objects such as mirrors, walls, aquariums, ovens, cordless phones, and radio-waves emitting devices, interfere with the Velop’s network.
Therefore, while choosing a location for the Velop and the nodes, you must ensure no such objects are around the Velop.
The most ideal location for the Linksys Velop is in the middle of an open area, where no object could interfere with its frequency.

REBOOT THE VELOP

You can always try rebooting the Linksys Velop to eliminate any minor issues within the Linksys Velop.
To begin with, unplug and power OFF the Linksys Velop.
After a few seconds, you can power it back ON.
At last, reconnect your devices to Velop’s network.
Now, the Linksys not working issue should be gone.

UPDATE THE FIRMWARE

Due to outdated firmware, the Linksys Velop keeps disconnecting issue occurs.
Therefore, it’s essential to keep your firmware always up-to-date.
Updating the firmware of the Velop eliminates all the internal glitches and bugs.
Initially, open the Linksys app and log into your Linksys Cloud account.
Now, from the Menu, go to the ‘Network Administration’ page.
After that, select the ‘Automatic Upgrade’ option.
At last, the Velop mesh system will.
If the ‘Automatic Upgrade’ is OFF, you will receive a notification when firmware comes.
When you receive the notification, click ‘Update Now’ to initiate the upgrade.
Remember to not interrupt the firmware upgrade in any way.

RESET THE LINKSYS VELOP

If the issue persists, you can to fix the Linksys Velop not connecting.
The reset troubleshoots all the technical glitches and bugs within the Linksys Velop.
To reset the Linksys Velop, ensure it’s powered ON and the nodes are connected to it.
First of all, find the reset button on the Linksys Velop.
Now press and hold the reset button on the Velop.
When the LED light on the Velop turns solid red and fades away, you can release the button.
The reset is successful and now you can reconfigure it as the default settings are back.

HOW TO FIX THE ISSUE OF LINKSYS VELOP KEEPS DISCONNECTING?