The Complete Manual for Updating Brother Printer Firmware

The newest and most cutting-edge printers available are Brother models. They need specific items in order to be maintained. Updates to the firmware are one of such items. Updating the printer’s internal components’ software is known as a brother firmware update. The hardware operations of your gadget are assisted by its software. We’ll learn about Brother printer firmware updates in this blog.

Periodically, you will need to update the firmware on your Brother printer. When a firmware update is required, your printer will alert you on its own. Your computer needs to have installed the necessary printer drivers for the printer in order to upgrade the firmware. Verify that the printer is powered on. Hold off until the firmware upgrade is finished; it can take a few minutes. Updating the firmware on your Brother printer requires a few steps.

First step: Fit the printer into a wall outlet.
– Connect the power wire to a power outlet and the power adapter to your printer as your first step.
– Ensure that the LED light is solid green after that.
– Now attach one end of your USB cable to the appropriate port on your computer and the other end to the USB interface.

Second Step : Visit Brother’s official website to download the firmware update tool.
– Use a web browser to look up support.brother.com.
– You then need to select Downloads.
– There are two alternatives available for the following step:
A. You can click on Search after typing the name of your model into the provided field.
B. Alternatively, you can look through the Model Name > Product Series > Product Category.
– Select the type of operating system you use if option 1 was selected.
– In the event that option 2 was selected, select your specific operating system.
– Next, press the “Search” button.
– Click on the file that needs to be downloaded.
– The conditions of your End-User licensing agreement must then be accepted by checking the box and downloading the file.

Third Step: Extract the downloaded file.
– After the download is complete, locate where you stored the file and double-click it to begin the unzipping process.
– Double-click PrTrExp at this point to start the update.
– Then click the Transfer button.
– The window will indicate that the transfer was successful with a message once you’ve finished updating.
– Finally, press OK to close the window.

The simplest procedures to wirelessly configure your Brother printer with your device are as follows. Make sure your internet connection is stable and carefully follow the instructions. In the event if not, the connection might not be made properly.

– Initially, confirm that the PC and Brother printer are linked to a wireless network.
– You need to be aware of your network’s correct network name and password.
– Moreover, only the initial WEP password can be recognized by the Brother printer. Thus, if you have more than one password, use only one.
– Next, make sure that you can print using your Brother printer.
– Next, select Menu from the Control Panel of your printer.
– Now, slide the screen to pick Network with the Up and Down buttons, and then click OK.
– Select WLAN after that, then press the OK button.
– Next, proceed to the Setup Wizard and press the OK button.
– Click OK once your Brother printer has identified your network and shown it.
– Finally, go to Brother’s official website and download the printer drivers.